To prevent skidding on slippery surfaces:
- Drive slowly and stay farther behind the vehicle ahead of you.
- Slow down as you approach curves and intersections.
- Avoid fast turns.
- Avoid quick stops.
- Shift to low gear before going down a steep hill.
Your car can start to skid out of control if you're going too fast on slippery roads, if you turn the wheel too sharply, if you brake or accelerate too quickly, or even if you get hit by a gust of wind.
Turn your steering wheel into the skid.
Aim for the direction you want your car to go. If the front end of your car starts drifting to the left, turn your steering wheel in the opposite direction – to the right.Here are some tips to help you in case your vehicle begins to skid on snow or ice:
- Remove your foot from the accelerator. Using your accelerator will spin your vehicle's wheels, so it's the last thing you want to touch in the event of a skid.
- Avoid slamming on the brakes.
- Steer away from the skid.
- Don't oversteer.
This is because the force (friction) applied by the brakes on the car wheel can exceed the traction (friction) of the car tyre on the road surface. That means that the brakes are locking, and so as your wheels. The skid means that only a small patch of the tyre is in contact with the road and it's loosing grip.
If your car enters a front-wheel skid, ease off the accelerator. If you are driving a car with manual transmission, depress the clutch. With your eyes focused on your “target”, try to steer the car back on course. If you don't regain control of the car within 2-3 seconds, THEN depress the brake lightly.
If you want to do a burnout in a manual vehicle, put your car into first gear, depress the clutch fully, and start revving the engine. As long as the clutch is all the way in, your car shouldn't move. Lock the handbrake, then release the clutch so the tires will start spinning quickly, resulting in the burnout smoke.
Most skids occur when conditions are slippery. If you find yourself in a skid, take your feet off the pedals. Stop braking and stop accelerating. Then, quickly turn the steering wheel in the direction you want to go.
By 0–60 mph (0–97 km/h) time (3.0 seconds or less)
| Car | Model Year | Time |
|---|
| Porsche 918 Spyder | 2015 | 2.1 sec |
| Dodge Challenger SRT Demon | 2018 | 2.1 sec |
| Tesla Model S P100D w/Ludicrous+ Update | 2017 | 2.28 sec |
| Tesla Model S Performance w/Ludicrous Mode | 2020 | 2.3 sec |
Fuel-Efficient Cars
| Make & Model | Fuel Economy (Overall mpg = 40+) | 0-60 mph Acceleration Time (Equal to or less than 11.0 seconds) |
|---|
| BMW i3 Giga | 1391 | 7.5 |
| Toyota Prius Prime | 1331/502 | 10.8 |
| Tesla Model 3 Long Range | 1301 | 5.3 |
| Hyundai Kona Electric Limited | 1201 | 6.6 |
By 1/4 mile or 400 metre times (11 seconds or less)
| Car | Year | Time |
|---|
| Ferrari LaFerrari | 2015 | 9.8 sec at 240 km/h (149 mph) |
| McLaren P1 | 2015 | 9.8 sec at 239.6 km/h (148.9 mph) |
| Porsche 918 Spyder | 2015 | 9.8 sec at 238.6 km/h (148.3 mph) |
| McLaren 720S | 2018 | 9.9 sec at 238.5 km/h (148.2 mph) |
Measuring the 0 to 60 mph speed of vehicles is usually done in a closed setting such as a race car track or closed lot used for professional drivers. This is done to reduce risk to the drivers, their teams, and the public. The driver focuses solely on driving straight and fast with professional quick gear shifting.
1) Different people use different diameter skid pads. The large the diameter the higher the number for a given tire. 2) Different surfaces. Each different surface has a different coeffecient of friction, thus effecting the skid pad numbers.
Unfortunately, 0 to 60 is about as relevant to the actual experience of driving performance cars as fuel economy. That's because, not only is 0 to 60 a misleading measurement of performance, it does very little to describe the subjective experience of driving.